| Documents on this page will be opened as a PDF file or be downloaded to your computer depending on your personal settings. |
Indiana Test Methods Index | |||
| ITM No. | Effective Date | Contact Person | Title |
| ITM 1 | 5/6/2021 | M. Beeson | Indiana test method procedures |
| ITM 202 | 6/16/2015 | K. Cummins | Acid insoluble content of fine aggregate |
| ITM 203 | 5/6/2021 | M. Ehrhart | Control procedures for classification of aggregates |
| ITM 205 | 5/9/2017 | M. Ehrhart | Acceptance procedures for dolomite aggregates |
| ITM 206 | 6/16/2015 | M. Ehrhart | Scratch hardness of coarse aggregate particles |
| ITM 207 | 12/18/2023 | M. Ehrhart | Sampling stockpiled aggregates |
| ITM 208 | 6/16/2015 | M. Zaheer | Permeability of aggregates |
| ITM 209 | 6/16/2015 | M. Ehrhart | Soundness of aggregates by freezing and thawing in a brine solution |
| ITM 210 | 8/10/2023 | M. Ehrhart | Class AP coarse aggregate |
| ITM 211 | 5/6/2021 | M. Ehrhart | Certified aggregate producer program |
| ITM 212 | 8/1/2019 | M. Ehrhart | Acceptance procedure of air cooled blast furnace slag for leachate determination |
| ITM 214 | 11/29/2016 | M. Ehrhart | Acceptance procedures for polish resistant aggregates |
| ITM 215 | 6/16/2015 | N. Siddiki | Recycled foundry sand toxicity test |
| ITM 216 | 4/4/2008 | M. Nelson | Lightweight dynamic cone penetrometer testing of flowable backfill |
| ITM 217 | 6/16/2015 | M. Nelson | Dry flow testing of flowable backfill |
| ITM 218 | 6/16/2015 | M. Nelson | Dry unit weight for flowable backfill |
| ITM 219 | 7/14/2022 | M. Ehrhart | Acceptance procedures for steel furnace slag for deleterious materials |
| ITM 220 | 6/16/2015 | N. Awwad | Class AS aggregate for use in SMA mixture |
| ITM 221 | 11/8/2018 | N. Awwad |
Acceptance Procedures for HMA Surface Mixture Coarse Aggregates for ESAL 10,000,000
|
| ITM 222 | 11/12/2015 | M. Nelson | Specific Gravity Factor and Absorption of Lightweight Fine Aggregate |
| ITM 224 | 11/10/2021 | M. Ehrhart | Flakiness Index of Aggregates |
| ITM 225 | 3/26/2018 | M. Ehrhart | Acceptance Procedures for Aggregate Drainage Layers |
| ITM 226 | 11/3/2023 | M. Ehrhart | Acceptance Procedures for Concrete Coarse Aggregates |
| ITM 301 | 4/15/2024 | J. Reilman | Reinforcing Bar, Dowel Bar, and Welded Wire Reinforcement Certification Program |
| ITM 401 | 6/16/2015 | M. Nelson | High pressure air content of hardened portland cement concrete |
| ITM 402 | 2/6/2020 | M. Nelson | Strength of portland cement concrete pavement (PCCP) using the maturity method utilizing the time temperature factor methodology |
| ITM 403 | 5/6/2021 | M. Nelson | Water-cementitious ratio |
| ITM 404 | 6/16/2015 | M. Nelson | PCCP core length determination |
| ITM 405 | 8/10/2023 | M. Nelson | Portland cement concrete plant inspection |
| ITM 407 | 2/7/2019 | M. Nelson | Tensile Bond Pull-Off Test |
| ITM 408 | 8/15/2022 | M. Nelson | Real-Time In-Place Compressive Strength of Concrete Using Electromechanical Resonance |
| ITM 505 | 6/16/2015 | M. Zaheer | Five-cycle slake resistance test on shale |
| ITM 506 | 5/4/2023 | N. Siddiki | Field determination of moisture content of soil |
| ITM 507 | 11/10/2021 | N. Siddiki | Determination of calcium/magnesium carbonate content in soils using sequential loss on ignition test |
| ITM 508 | 5/9/2019 | N. Siddiki | Field determination of deflection using light weight deflectometer |
| ITM 509 | 7/14/2022 | N. Siddiki | Field determination of Strength Using Dynamic Cone Penetrometer |
| ITM 510 | 4/17/2013 | N. Siddiki | Determining Sulfate Content in Soils by Colorimetric Method |
| ITM 511 | 4/17/2013 | N. Siddiki | Jar Slake Test |
| ITM 512 | 5/9/2019 | N. Siddiki | Field Determination of Maximum Dry Density and Optimum Moisture Content of Soil |
| ITM 513 | 2/4/2021 | N. Siddiki | Determining Target Intelligent Compaction Measurement Value of Soil |
| ITM 514 | 11/05/2020 | N. Siddiki | Test Sections for Aggregates and Recycled Materials |
| ITM 515 | 11/12/2015 | N. Siddiki | Determination of the Quality of the Soil Plant Growth Layer |
| ITM 516 | 11/05/2020 | N. Siddiki | Spreading, Mixing and Identification of Chemical Modifiers in Soil Stabilization Construction |
| ITM 517 | 11/10/2021 | N. Siddiki | Percolation and Infiltration Tests |
| ITM 518 | 12/18/2023 | S. Clawson | Installation and Abandonment Procedures for Inclinometer |
| ITM 519 | 8/1/2024 | N. Siddiki | Determining Phosphorous Content in Soils by Spectrophotometric Method |
| ITM 520 | 8/1/2024 | N. Siddiki | Determining Potassium Content in Soils by Spectrophotometric Method |
| ITM 571 | 3/1/2021 | N. Awwad | Quantitative extraction of asphalt/binder and gradation of extracted aggregate from HMA mixtures |
| ITM 572 | 6/16/2015 | N. Awwad | Drying HMA mixtures |
| ITM 573 | 8/5/2021 | N. Awwad | Determining the Potential of Water Stripping in HMA Pavements |
| ITM 574 | 5/2/2024 | N. Awwad | HMA Mix Design Laboratory Requirements |
| ITM 576 | 12/18/2023 | J. Galetka | Laboratory evaluation of anti-adhesive agents |
| ITM 579 | 6/16/2015 | N. Awwad | Quantity determination of asphalt materials and aggregates for seal coats |
| ITM 580 | 08/15/2022 | N. Awwad | Sampling HMA |
| ITM 581.1 | 12/18/2023 | N. Awwad | Performance-Graded Asphalt Binder Supplier Program (for use on contracts let BEFORE 9/1/2024 or with PG 64-22, PG 70-22, or PG 76-22 binders) |
| ITM 581.2 | 12/18/2023 | N. Awwad | Performance-Graded Asphalt Binder Supplier Program (for use on contracts let ON or AFTER 9/1/2024 or with PG58S-28, PG58H-28, or PG58E-28 binders) |
| ITM 583.1 | 12/18/2023 | N. Awwad | Certified Hot Mix Asphalt Producer Program (for use on contracts let BEFORE 9/1/2024 or with PG 64-22, PG 70-22, or PG 76-22 binders) |
| ITM 583.2 | 12/18/2023 | N. Awwad | Certified Hot Mix Asphalt Producer Program (for use on contracts let ON or AFTER 9/1/2024 or with PG58S-28, PG58H-28, or PG58E-28 binders) |
| ITM 584 | 2/7/2019 | N. Awwad | Bulk specific gravity of aggregate blends in HMA mixtures |
| ITM 586 | 6/16/2015 | N. Awwad | Asphalt content by ignition |
| ITM 587 | 3/1/2021 | N. Awwad | Reducing HMA samples to testing size |
| ITM 588 | 4/4/2008 | N. Awwad | Percent Within Limits (PWL) |
| ITM 589 | 4/17/2013 | N. Awwad | Asphalt Binder Film Thickness |
| ITM 590 | 5/10/2018 | N. Awwad | Total Aggregate Bulk Specific Gravity Determination from Extracted HMA or SMA Mixture |
| ITM 591 | 5/7/2020 | N. Awwad | Delta Pb (ΔPb) Determination for Dense Graded HMA or SMA Mixtures |
| ITM 592 | 8/10/2023 | N. Awwad | Mix Design Procedure for Cold Recycling (CR) with Asphalt Emulsion |
| ITM 593 | 5/4/2023 | N. Awwad | Asphalt Emulsion Supplier Certification Program |
| ITM 594 | 5/7/2020 | N. Awwad | Mix Design Procedure for Full Depth Reclamation (FDR) with Asphalt Emulsion |
| ITM 595 | 11/3/2022 | N. Awwad | Mix Design Procedure for Full Depth Reclamation (FDR) with Cement |
| ITM 596 | 12/18/2023 | N. Awwad | Alternative Method for Determining Bulk Specific Gravity of Reclaimed Asphalt Pavement |
| ITM 597 | 2/7/2019 | N. Awwad | QC/QA HMA Gsb Procedures |
| ITM 598 | 5/4/2023 | N. Awwad | Mass Retention of Emulsified Asphalts Subjected to Water Droplets |
| ITM 599 | 8/5/2021 | N. Awwad | Identification of Penetrating Emulsified Asphalts |
| ITM 606 | 5/2/2024 | K. Cummins | Qualified Product List Procedures and Requirements for Structural Steel Coating Systems |
| ITM 607 | 12/18/2023 | K. Cummins | Qualified product list requirements for organic zinc primer and waterborne coatings |
| ITM 801 | 6/16/2015 | N. Awwad | Determining asphalt content of preformed expansion joint fillers for concrete paving and structural construction |
| ITM 802 | 9/23/2021 | J. Reilman | Random sampling |
| ITM 803 | 2/26/2020 | J. Reilman | Contractor quality control plans (for use on contracts let BEFORE 9/1/2022) |
| ITM 803 | 8/10/2023 | J. Reilman | Contractor quality control plans (for use on contracts let ON OR AFTER 9/1/2022) |
| ITM 804 | 5/4/2023 | J. Reilman | Material Certification and Qualified Product List Application Forms |
| ITM 806 | 5/2/2024 | J. Reilman | Qualified Products List Requirements |
| ITM 807 | 2/26/2020 | M. Nelson | Laboratory testing of chemical anchor systems |
| ITM 808 | 6/16/2015 | M. Nelson | Laboratory testing of PCC sealer/healers |
| ITM 810 | 4/15/2024 | J. Reilman | Sampling deicing material |
| ITM 811 | 6/16/2015 | K. Cummins | Sampling bulk containers of glass beads |
| ITM 812 | 4/5/2017 | N. Awwad | Macrotexture of milled pavement |
| ITM 813 | 2/26/2020 | M. Nelson | Certified precast concrete producer program |
| ITM 814 | 2/26/2020 | M. Nelson | Certified precast prestressed concrete producer program |
| ITM 902 | 2/10/2022 | H. Phillips | Verifying sieves |
| ITM 903 | 6/16/2015 | H. Phillips | Verifying ovens |
| ITM 905 | 12/8/2021 | H. Phillips | Verifying Vacuum Chambers |
| ITM 906 | 4/5/2024 | H. Phillips | Verifying mechanical shakers |
| ITM 908 | 11/3/2022 | H. Phillips | Verifying calibration settings for superpave gyratory compactors |
| ITM 909 | 6/16/2015 | H. Phillips | Verifying thermometers |
| ITM 910 | 4/11/2022 | H. Phillips | Verifying balances |
| ITM 911 | 8/16/2017 | H. Phillips | Verifying slump cones |
| ITM 912 | 4/15/2024 | J. Reilman | Profilographs |
| ITM 914 | 5/2/2024 | N. Siddiki | Verifying Soil Test Molds |
| ITM 915 | 8/5/2021 | N. Siddiki | Verifying Soils Compaction Rammers |
| ITM 916 | 12/18/2023 | H. Phillips | Verification of Calipers |
| ITM 917 | 5/2/2024 | J. Blanchard | Inertial Profilers |
| ITM 930 | 4/15/2024 | D. Boruff | Procedure for outdoor weathering evaluation and approval list requirements for reflective sheeting materials |
| ITM 931 | 5/2/2024 | D. Boruff | Measurement of retroreflective pavement marking materials |
| ITM 932 | 12/29/2020 | Je. Kruger | Procedure for bench testing, field testing, and approval list requirements for traffic controller cabinet components |
| ITM 933 | 5/4/2023 | Je. Kruger | Procedure for bench testing, field testing, and approval list requirements for 12 inch light emitting diode (LED) traffic signal modules |
| ITM 934 | 6/16/2015 | Je. Kruger | Procedure for evaluating vehicle detection performance |
| ITM 935 | 6/16/2015 | Je. Kruger | Procedure for bench testing, field testing, and approval list requirements for external time clocks |
| ITM 936 | 6/16/2015 | Je. Kruger | Procedure for bench testing, field testing, and approval list requirements for video vehicle detectors |
| ITM 937 | 11/8/2018 | Je. Kruger | Procedure for bench testing, field testing, and approval list requirements for accessible pedestrian signals (APS) |
| ITM 947 | 6/16/2015 | Je. Kruger | Procedure for bench testing, field evaluation, and approval list requirements for spread spectrum radio modems |
| ITM 948 | 6/16/2015 | Je. Kruger | Procedure for bench testing, field testing and approval list requirements for 5 ghz unlicensed frequency band radios |
| ITM 949 | 6/16/2015 | Je. Kruger | Procedure for bench testing, field testing and approval list requirements for ITS AFP controllers |
| ITM 950 | 6/16/2015 | Je. Kruger | Procedure for bench testing, field testing and approval list requirements for ITS Ethernet switches |
| ITM 951 | 6/16/2015 | Je. Kruger | Procedure for bench testing, field testing, and approval list requirements for high speed camera dome with pan-tilt-zoom |
| ITM 953 | 6/16/2015 | Je. Kruger | Procedure for bench testing, field testing, and approval list requirements for microwave vehicle radar |
| ITM 954 | 6/16/2015 | D. Boruff | Procedure for bench testing, field testing and approval list requirements for wireless vehicle detection systems (WVDS) |
| ITM 955 | 11/08/2018 | D. Boruff | Procedure for Evaluation and Approved List Requirements for Automated Flagger Assistance Devices |
| ITM 956 | 2/7/2019 | D. Boruff | Procedure for Evaluation and Approval List Requirements for Portable Traffic Signals |
| ITM 957 | 2/2/2023 | D. Boruff | Procedure for Evaluation and Approval List Requirements for Solid State Ballasted Luminaires |
| ITM 958 | 11/10/2021 | D. Boruff | Procedure for Evaluation and QPL Requirements for ADA-Compliant Work Zone Devices |
| ITM 959 | 2/2/2023 | D. Boruff | Procedure for Evaluation and QPL Requirements for Pavement Marking Beads |