CARROLL CONS. SCHOOL CORP.
To view the full report for a bus inspection, click on the PDF icon on the right.

Go Back New Search

Bus Inspections

Bus # Inspection Date/Time Inspection Valid Until Inspection Type Inspection Status Violations Inspected By Reports
23 6/21/2023 9:18:01 AM 9/30/2024 12:00:00 AM Annual Approved None Nate King Export Inspection Report
23 6/8/2022 1:57:01 PM 9/30/2023 12:00:00 AM Annual Approved None Nate King Export Inspection Report
23 6/11/2021 10:21:17 AM 9/30/2022 12:00:00 AM Registration Approved None Nate King Export Inspection Report
23 7/16/2020 9:57:01 AM 2/16/2021 9:57:01 AM Re-Inspection Approved None Nate King Export Inspection Report
23 7/16/2020 9:57:00 AM 8/14/2020 9:57:00 AM Annual Ordered Repaired
  • Upholstery or padding is ripped, torn, or improperly repaired
Nate King Export Inspection Report
23 7/12/2019 11:31:01 AM 9/30/2020 12:00:00 AM Re-Inspection Approved None Nate King Export Inspection Report
23 7/12/2019 11:31:00 AM Annual Out of Service
  • Upholstery or padding is ripped, torn, or improperly repaired
  • Center/carrier bearing: any broken or loose center/carrier bearing bracket, bolts or mounting hardware, any center bearing bracket crack equaling fifty (50) percent or more of the original width, more than one half (1/2) inch vertical movement of the shaft in the center bearing carrier (rubber)
Nate King Export Inspection Report
23 6/28/2018 10:55:01 AM 9/30/2019 12:00:00 AM Re-Inspection Approved None Nate King Export Inspection Report
23 6/28/2018 10:55:00 AM 7/27/2018 10:55:00 AM Annual Ordered Repaired
  • Required back-up lights do not function.
  • Upholstery or padding is ripped, torn, or improperly repaired
  • Any dome light is inoperative
Nate King Export Inspection Report
23 7/26/2017 1:23:01 PM 9/30/2018 12:00:00 AM Re-Inspection Approved None Nate King Export Inspection Report
23 7/12/2017 11:03:00 AM Annual Out of Service
  • Upholstery or padding is ripped, torn, or improperly repaired
  • Center/carrier bearing: any broken or loose center/carrier bearing bracket, bolts or mounting hardware, any center bearing bracket crack equaling fifty (50) percent or more of the original width, more than one half (1/2) inch vertical movement of the shaft in the center bearing carrier (rubber)
Nate King Export Inspection Report
23 7/21/2016 11:07:01 AM 9/30/2017 12:00:00 AM Annual Approved None Nate King Export Inspection Report
23 7/15/2015 12:59:01 PM 9/30/2016 12:00:00 AM Annual Approved None Nate King Export Inspection Report
23 7/1/2014 1:09:01 PM 9/30/2015 12:00:00 AM Annual Approved None Nate King Export Inspection Report
23 4/9/2013 10:14:01 AM 9/30/2014 12:00:00 AM Annual Approved None Nate King Export Inspection Report
23 8/8/2012 2:52:00 PM 9/30/2013 12:00:00 AM Annual Approved None Joel Flores Export Inspection Report
Go Back New Search