SOUTH HARRISON COMM. SCH. CORP

To view the full report for a bus inspection, click on the PDF icon on the right.

• The headlight dimmer switch fails to operate properly

• Any clearance light is missing, cracked, faded, wrong color, or inoperative

• Required back-up lights do not function.

• The bus body has rust or rusted through areas which may weaken the body
• The bus body has loose, damaged or improperly aligned body parts. These would include rivets, bolts, and body panels and/or rub rails
• Any seat is loose from the floor or seat rail

• The bus body has loose, damaged or improperly aligned body parts. These would include rivets, bolts, and body panels and/or rub rails

• The bus body has loose, damaged or improperly aligned body parts. These would include rivets, bolts, and body panels and/or rub rails
• Any hanger, clamp or bracket is missing, loose or broken

• Washers do not function properly in any manner
• Any door seals are missing, damaged, or torn
• Is no audible signal when the emergency door is open and ignition switch is on

• Audible warning device, when required, is not working properly. Buzzers are required after 5-2-94

• A heater motor is not operating properly

• Any seat back or bottom is loose
• Upholstery or padding is ripped, torn, or improperly repaired
• A heater motor is not operating properly

• Any paint is badly faded or peeling

• Upholstery or padding is ripped, torn, or improperly repaired.
• An exhaust leak can be felt with the bare hand six (6) inches from the leak in any direction (with the engine idling and the system unrestricted).

• If required, positive door opening device is missing or fails to operate properly.

• Required back-up lights do not function.
• One (1) taillight or one (1) brake light does not function