2 |
1/14/2022 11:58:00 AM |
|
Annual |
Out of Service |
- Center/carrier bearing: any broken or loose center/carrier bearing bracket, bolts or mounting hardware, any center bearing bracket crack equaling fifty (50) percent or more of the original width, more than one half (1/2) inch vertical movement of the shaft in the center bearing carrier (rubber)
- Any section of the drive shaft is not protected with a metal safety loop
- Yokes: any visible crack in a yoke end, any yoke mounting hardware loose, horizontal or vertical movement of slip joint yoke great than half (1/2) inch, any loose, broken or missing end fitting fastener
- The front or rear bumper is not properly attached, missing, torn, loose, or altered.
- Any body surface protrudes beyond the normal limits of the body structure
- The bus body has loose, damaged or improperly aligned body parts. These would include rivets, bolts, and body panels and/or rub rails
- Upholstery or padding is ripped, torn, or improperly repaired
- See Notes: Any defect inspector deems a violation not listed
- Tailpipe has been reduced in a size (diameter) from the rear of the muffler
|
Jeremy Mason |
|