SHELBY EASTERN SCHOOLS

To view the full report for a bus inspection, click on the PDF icon on the right.

• Any required lettering is missing or faded.
• Any rear tire has less than 1/32 inch tread depth when measured in any two adjacent major grooves
• Tires with visible bumps, bulges, or knots indicating partial failure or separation of the tire structure

• Required back-up lights do not function.

• Upholstery or padding is ripped, torn, or improperly repaired
• A heater motor is not operating properly
• There is debris in the bus. (needs cleaned/includes dirt)
• There is fuel leaking from any point on in the fuel system

• The bus body has loose, damaged or improperly aligned body parts. These would include rivets, bolts, and body panels and/or rub rails

• The required low air-pressure warning device fails to operate properly

• Two (2) or more taillights or brake lights do not function

• Audible warning device, when required, is not working properly. Buzzers are required after 5-2-94

• Any seat back or bottom is loose.
• Audible warning device, when required, is not working properly. Buzzers are required after 5-2-94
• There is significant engine oil or fluid leak from the engine.