SOUTHEAST DUBOIS CO. SCH. CORP

To view the full report for a bus inspection, click on the PDF icon on the right.

• Warning lights fail to operate correctly
• If the emergency window instructions are illegible or missing. Must be within 6 inches of the release handle

• Upholstery or padding is ripped, torn, or improperly repaired

• Upholstery or padding is ripped, torn, or improperly repaired

• Any clearance light is missing, cracked, faded, wrong color, or inoperative
• Upholstery or padding is ripped, torn, or improperly repaired

• The trash container is not secured to prevent movement and does not allow for easy removal and replacement
• Any rear tire has less than 2/32 inch tread depth when measured in any two adjacent major grooves

• Any rear tire has less than 2/32 inch tread depth when measured in any two adjacent major grooves
• The trash container is not secured to prevent movement and does not allow for easy removal and replacement
• If the emergency window instructions are illegible or missing. Must be within 6 inches of the release handle

• Any reflector is missing, cracked, faded, or the wrong color.
• Any lens is cracked, broken or discolored

• The seat belt cutter is not secured using a positive fastening method.

• Required back-up lights do not function.

• See Notes: Any defect inspector deems a violation not listed
• Any hanger, clamp or bracket is missing, loose or broken
• One (1) taillight or one (1) brake light does not function

• A heater motor is not operating properly

• Flip seat does not stay in the upright position when no passengers are seated

• A dripping oil or fluid leak

• Warning lights fail to operate correctly
• Flip seat does not stay in the upright position when no passengers are seated.
• There is no brake certification, the certification is expired, or is not signed within the six-month requirement.

• There are missing or broken motor mounts.

• The stop arm has faded or lost reflectivity
• Two (2) or more taillights or brake lights do not function
• One (1) taillight or one (1) brake light does not function

• There is no brake certification form the certification is expired or is not signed within the six-month requirement.
• Any push-rod travel measures 1/4 inch or more beyond the readjustment limit, or if any two (2) brakes measure less than 1/4 inch beyond the readjustment limit.
• Audible warning device, when required, is not working properly. Buzzers are required after 5-2-94

• There is no brake certification form the certification is expired or is not signed within the six-month requirement.
• Any push-rod travel measures 1/4 inch or more beyond the readjustment limit, or if any two (2) brakes measure less than 1/4 inch beyond the readjustment limit.
• Audible warning device, when required, is not working properly. Buzzers are required after 5-2-94
• The fan is not controlled by a separate switch.

• There is no brake certification form the certification is expired or is not signed within the six-month requirement.
• Any push-rod travel measures 1/4 inch or more beyond the readjustment limit, or if any two (2) brakes measure less than 1/4 inch beyond the readjustment limit.