STUDENT TRANSIT - RICHMOND

To view the full report for a bus inspection, click on the PDF icon on the right.

• Any crossmember is cracked or broken
• Washers do not function properly in any manner
• The seat belt cutter is not located within the driver’s view and reach
• The seat belt cutter is not secured using a positive fastening method.
• Audible warning device, when required, is not working properly. Buzzers are required after 5-2-94
• Any glass or glazing is broken through or missing
• Any glass or glazing is cracked, chipped, clouded or distorted badly enough to prohibit a clear view from within the bus
• The front or rear bumper is not properly attached, missing, torn, loose, or altered.
• The front bumper does not extend to the edge of the fenders
• Steering box is loose on the frame
• Mirror or mirror backs that are loose or improperly mounted
• Warning lights fail to operate correctly
• The accelerator, clutch or brake pedal is without grooved rubber coverings or as it came from the manufacturer
• Any brake line or hose is abraded (chafed), cracked, bulging or leaking (leaking at other than a proper connection).
• There is body damage which could cause injury to persons near the bus (e.g. jagged metal edges, etc.)((Exigent circumstance can be taken into consideration to allow the bus to return home in a post crash inspection if bus is out of its district)).
• The bus body has loose, damaged or improperly aligned body parts. These would include rivets, bolts, and body panels and/or rub rails
• Any body surface protrudes beyond the normal limits of the body structure
• Any door seals are missing, damaged, or torn
• The service door does not open or close properly
• Both lamps are inoperative on high beam
• Both lamps are inoperative on low beam
• See Notes: Any defect inspector deems a violation not listed
• See Notes: Any defect inspector deems a violation not listed
• Frame is deteriorated, cracked, broken or severely bent
• A wiper arm or blade is missing
• Step-well area is weakened
• Any front turn signal does not function properly
• There are loose, broken or frayed wires
• The grill is missing
• There is debris in the bus. (needs cleaned/includes dirt)
• There are loose items that would create a hazard. (Broom, Scraper, Items on dash etc.)