AUXILIO SERVICES (MUNCIE)

Select a bus number below to see all the inspection reports for that particular vehicle.
To view the full report for a bus inspection, click on the PDF icon on the right.

• There is no brake certification form the certification is expired or is not signed within the six-month requirement
• Upholstery or padding is ripped, torn, or improperly repaired

• The front or rear bumper is not properly attached, missing, torn, loose, or altered.
• See Notes: Any defect inspector deems a violation not listed
• Any push-rod travel measures 1/4 inch or more beyond the readjustment limit, or if any two (2) brakes measure less than 1/4 inch beyond the readjustment limit
• Any hanger, clamp or bracket is missing, loose or broken
• A dripping oil or fluid leak
• A heater motor is not operating properly
• The first aid kit is not complete: One (1) package adhesive bandages; containing a total of sixteen (16) 1" x 3" bandages, 1 roll 1”x5yd, 1 blunt scissor, 6 3x3” gauze pads (sterile), 4 2”x5yd gauze stretch material (nonsterile), 3 oval eye pads (sterile), 2 triangular bandages, 1 instruction.

• See Notes: Any defect inspector deems a violation not listed
• Upholstery or padding is ripped, torn, or improperly repaired
• Any required padding is missing

• The first aid or bodily fluid (optional) kit is not securely mounted, inside, in a location accessible to the driver in plain view, or if in a bulkhead or storage compartment, is not secured, or the cover of the bulkhead/storage compartment is not clearly labeled "Emergency Equipment.”
• There are any leaks from the differential, pinion seal, hubs or wheel seals

• A dripping oil or fluid leak

• A dripping oil or fluid leak
• The bus body has loose, damaged or improperly aligned body parts. These would include rivets, bolts, and body panels and/or rub rails

• A dripping oil or fluid leak
• There is movement at any spring loaded drag link or the rod end (using hand pressure)
• See Notes: Any defect inspector deems a violation not listed
• There are any loose, broken, or missing mountings

• See Notes: Any defect inspector deems a violation not listed

• A heater motor is not operating properly
• A dripping oil or fluid leak

• Step-well light is missing or inoperative
• A dripping oil or fluid leak

• The bus body has loose, damaged or improperly aligned body parts. These would include rivets, bolts, and body panels and/or rub rails

• The reflective material is placed anywhere other than on the front and rear, or both, of the bus between the warning lamps; each side beltline, seat line, or floor line or all three (3); outlining each required emergency exit; or across the rear of the bus directly above the rear bumper.

• Any hanger, clamp or bracket is missing, loose or broken

• A dripping oil or fluid leak

• Washers do not function properly in any manner
• Upholstery or padding is ripped, torn, or improperly repaired
• Prohibited area sign is missing or obscured

• Any hanger, clamp or bracket is missing, loose or broken
• Upholstery or padding is ripped, torn, or improperly repaired
• A dripping oil or fluid leak