FIRST STUDENT-GARY

Select a bus number below to see all the inspection reports for that particular vehicle.
To view the full report for a bus inspection, click on the PDF icon on the right.

• The service door does not open or close properly

• Any dome light is inoperative
• Upholstery or padding is ripped, torn, or improperly repaired

• Any dome light is inoperative
• If the emergency window instructions are illegible or missing. Must be within 6 inches of the release handle
• Is no audible signal when the emergency door is open and ignition switch is on

• Any required lettering is missing or faded.
• Is no audible signal when the emergency door is open and ignition switch is on

• If bus manufactured after 5-2-1994, positive door opening device is missing or fails to operate properly

• There is debris in the bus. (needs cleaned/includes dirt)
• The trash container is not secured to prevent movement and does not allow for easy removal and replacement

• Air leak at proper connection
• If the emergency window instructions are illegible or missing. Must be within 6 inches of the release handle
• The horn does not operate at all

• Air leak at proper connection

• The seat belt cutter is not secured using a positive fastening method.
• Any front turn signal does not function properly
• Not securely mounted

• Any front turn signal does not function properly
• If the emergency window instructions are illegible or missing. Must be within 6 inches of the release handle
• The strobe light is inoperative

• There is any defect which the inspector feels would adversely affect the ability of the vehicle to stop safely
• Any clearance light is missing, cracked, faded, wrong color, or inoperative

• There is any defect which the inspector feels would adversely affect the ability of the vehicle to stop safely
• Any front turn signal does not function properly
• Any required lettering is missing or faded.
• Audible warning device, when required, is not working properly. Buzzers are required after 5-2-94

• If the emergency window instructions are illegible or missing. Must be within 6 inches of the release handle

• There are any loose, broken, or missing mountings

• The strobe light is inoperative

• See Notes: Any defect inspector deems a violation not listed
• Stop arm lights do not flash
• Any stop arm light is inoperative
• Stop arm does not function properly
• Stop arm does not fully extend to a right angle to the bus
• Non safety related signs/decorations posted.
• The back – up warning alarm is not 97 DBA (+/- 4 DBA

• There are any loose, broken, or missing mountings

• The strobe light is inoperative

• There are any loose, broken, or missing mountings
• Any tire is flat

• The strobe light is inoperative
• There are any loose, broken, or missing mountings

• The strobe light is inoperative
• Any push-rod travel measures 1/4 inch or more beyond the readjustment limit, or if any two (2) brakes measure less than 1/4 inch beyond the readjustment limit

• There are any loose, broken, or missing mountings

• Any optional rear stop arm device or school bus crossing arm criteria is not met
• There are any loose, broken, or missing mountings

• There are any loose, broken, or missing mountings

• There are any loose, broken, or missing mountings

• There are any loose, broken, or missing mountings
• Any headlight is inoperative

• There are any loose, broken, or missing mountings
• The strobe light is inoperative

• Battery will not activate the starting motor
• Any stop arm light is inoperative
• The trash container is not secured to prevent movement and does not allow for easy removal and replacement

• Any push-rod travel measures 1/4 inch or more beyond the readjustment limit, or if any two (2) brakes measure less than 1/4 inch beyond the readjustment limit
• The trash container is not secured to prevent movement and does not allow for easy removal and replacement
• There are any loose, broken, or missing mountings

• There are objects blocking aisles or exits

• There are objects blocking aisles or exits

• There are any loose, broken, or missing mountings

• There is a significant leak from the engine or transmission onto the exhaust system which could potentially cause a fire

• There are any loose, broken, or missing mountings
• The strobe light is inoperative
• There is debris in the bus. (needs cleaned/includes dirt)