WAWASEE COMMUNITY SCHLS

Select a bus number below to see all the inspection reports for that particular vehicle.
To view the full report for a bus inspection, click on the PDF icon on the right.

• Any front turn signal does not function properly
• Any tire is flat
• Warning lights fail to operate correctly
• Any shock absorber is broken or missing
• Any belt is badly chaffed, cracked, broken or missing
• ABS warning light is illuminated
• There is no brake certification form the certification is expired or is not signed within the six-month requirement
• See Notes: Any defect inspector deems a violation not listed
• Rims are bent or loose
• Any headlight is inoperative
• Mountings are broken or bent badly enough to inhibit proper adjustment
• There is an air leak from any hose, line, tank, bag, or other component of an air suspension system
• The mirrors do not meet the outside mirror standard as set forth in 575 IAC 1-2-49
• The latch mechanism is missing
• Non safety related signs/decorations posted.
• There are loose items that would create a hazard. (Broom, Scraper, Items on dash etc.)
• See Notes: Any defect inspector deems a violation not listed
• Audible warning device, when required, is not working properly. Buzzers are required after 5-2-94
• If the words “EMERGENCY EXIT” does not appear on the top or bottom of the window or directly above each emergency exit window on the inside of the bus
• There are any decals or stickers, except those required by law, in the windshield or in the windows to the immediate right or left of the driver
• Any required reflective tape is applied in the wrong location, missing, and wrong width or badly faded
• Any spring hanger bushings or torque leaf bushings are worn, loose, broken or missing
• Battery compartment door is not securely fastened.
• There is movement at any spring loaded drag link or the rod end (using hand pressure)
• The front or rear bumper is not properly attached, missing, torn, loose, or altered.
• Upholstery or padding is ripped, torn, or improperly repaired
• The bus body has loose, damaged or improperly aligned body parts. These would include rivets, bolts, and body panels and/or rub rails
• There is body damage which could cause injury to persons near the bus (e.g. jagged metal edges, etc.)((Exigent circumstance can be taken into consideration to allow the bus to return home in a post crash inspection if bus is out of its district)).
• The trash container is not secured to prevent movement and does not allow for easy removal and replacement