ORLEANS COMMUNTIY SCHOOLS

To view the full report for a bus inspection, click on the PDF icon on the right.

• Any front turn signal does not function properly

• Any dome light is inoperative
• The bus body has loose, damaged or improperly aligned body parts. These would include rivets, bolts, and body panels and/or rub rails

• Any lens is cracked, broken or discolored
• Required back-up lights do not function.
• Center/carrier bearing: any broken or loose center/carrier bearing bracket, bolts or mounting hardware, any center bearing bracket crack equaling fifty (50) percent or more of the original width, more than one half (1/2) inch vertical movement of the shaft in the center bearing carrier (rubber)

• Any exhaust leak can be felt with the bare hand six (6) inches from the leak in any direction (with the engine idling and the system unrestricted).

• One (1) taillight or one (1) brake light does not function

• A heater motor is not operating properly

• Required back-up lights do not function.

• If the emergency window instructions are illegible or missing. Must be within 6 inches of the release handle

• The first aid kit is not properly displayed.

• There is no brake certification, the certification has expired, or is not signed within the six month requirement.
• The electric power assist motor fails to operate.

• Any component has deteriorated and allows the escape of exhaust gases (with the engine idling and the system unrestricted).

• Required back-up lights do not function.

• No OOS criteria.
• The first aid kit is not properly displayed.
• There is significant engine oil or fluid leak from the engine.