TAYLOR COMMUNITY SCHOOL CORP.

To view the full report for a bus inspection, click on the PDF icon on the right.

• The trash container is not secured to prevent movement and does not allow for easy removal and replacement
• A heater motor is not operating properly
• There is no brake certification, or the certification has expired or is not signed

• A heater motor is not operating properly

• ABS warning light is illuminated

• Any front tire has less than 4/32 inch tread depth when measured in any two adjacent major grooves
• Any rear tire has less than 2/32 inch tread depth when measured in any two adjacent major grooves
• Any hanger, clamp or bracket is missing, loose or broken
• If equipped the emergency warning buzzer does not sound
• ABS warning light is illuminated
• Any marker light or lens is missing, cracked, faded, wrong color, or inoperative

• ABS warning light is illuminated
• Any hanger, clamp or bracket is missing, loose or broken
• If equipped the emergency warning buzzer does not sound
• Any rear tire has less than 2/32 inch tread depth when measured in any two adjacent major grooves
• Any front tire has less than 4/32 inch tread depth when measured in any two adjacent major grooves
• Any marker light or lens is missing, cracked, faded, wrong color, or inoperative

• Any front tire has less than 4/32 inch tread depth when measured in any two adjacent major grooves

• Upholstery or padding is ripped, torn, or improperly repaired

• One (1) taillight or one (1) brake light does not function
• Washers do not function properly in any manner
• Required back-up lights do not function.

• One (1) taillight or one (1) brake light does not function

• A dripping oil or fluid leak

• The first aid kit is not complete: 3 packs of 16 1x3 adhesive strips, 1 scissor (4” min), 2 40”x40”x56” triangular bandages, 6 3”x3” gauze pads, 4 2”x4.1 yard rolls of gauze, 3 oval eye pads, 1 1”x5 yard of adhesive tape, 1 label instruction.

• Any dome light is inoperative

• Any marker light or lens is missing, cracked, faded, wrong color, or inoperative

• Required back-up lights do not function.

• Any push-rod travel measures less than 1/4 inch beyond the readjustment limit.
• The drive shaft has excessive up and down, or side to side movement at any universal joint or carrier bearing.

• The drive shaft has excessive up and down, or side to side movement at any universal joint or carrier bearing.
• Any push-rod travel measures less than 1/4 inch beyond the readjustment limit.

• Seat back or bottom is loose.
• A dripping oil or fluid leak.