BROWN CO SCH CORP

To view the full report for a bus inspection, click on the PDF icon on the right.

• Stop arm does not function properly

• Any component has deteriorated and allows the escape of exhaust gases (with the engine idling and the system unrestricted)

• Upholstery or padding is ripped, torn, or improperly repaired

• The stop arm lights do not flash alternately

• Tie rod end movement is greater than 1/8 inch (rotational movement is acceptable)

• Floor covering is missing, cut, loose, buckled, bulging, or not secure
• Step covering is loose, buckled, or made of a material other than rubber (i.e. rugs, carpets, mats, etc.)

• Floor covering is missing, cut, loose, buckled, bulging, or not secure

• Floor covering is missing, cut, loose, buckled, bulging, or not secure
• Step covering is loose, buckled, or made of a material other than rubber (i.e. rugs, carpets, mats, etc.)

• Any lens is cracked, broken or discolored
• Step covering is loose, buckled, or made of a material other than rubber (i.e. rugs, carpets, mats, etc.)
• Wiper blades are torn, cracked, brittle or otherwise deteriorated
• Floor covering is missing, cut, loose, buckled, bulging, or not secure

• Any rear tire has less than 2/32 inch tread depth when measured in any two adjacent major grooves

• Excessive effort is needed to open the emergency door
• Any component has deteriorated and allows the escape of exhaust gases (with the engine idling and the system unrestricted)
• Any rear tire has less than 2/32 inch tread depth when measured in any two adjacent major grooves
• There is debris in the bus. (needs cleaned/includes dirt)

• Any defect, which the inspector feels would adversely affect the ability of the vehicle to stop safely.
• There are leaks from the differential, pinion seal, or either rear wheel seal.
• Battery is loose in its mounting.