BROWN CO SCH CORP

To view the full report for a bus inspection, click on the PDF icon on the right.

• LED type lights have 50% or more pixels inoperable in one light. (NOTE: one letter in the word “STOP” equals one light.)

• Seatbelt installation does not meet the manufactures specifications
• There is any defect which the inspector feels would adversely affect the ability of the vehicle to stop safely
• Not securely mounted

• Any push-rod travel measures less than 1/4 inch beyond the readjustment limit

• If the emergency window instructions are illegible or missing. Must be within 6 inches of the release handle
• There is air leak at the stop arm air bladder that does not affect the air braking system

• Step covering is loose, buckled, or made of a material other than rubber (i.e. rugs, carpets, mats, etc.)
• Any push-rod travel measures 1/4 inch or more beyond the readjustment limit, or if any two (2) brakes measure less than 1/4 inch beyond the readjustment limit

• Audible warning device, when required, is not working properly. Buzzers are required after 5-2-94

• Step covering is loose, buckled, or made of a material other than rubber (i.e. rugs, carpets, mats, etc.)
• Any lens is cracked, broken or discolored
• A lens is cracked, missing or wrong color

• A lens is cracked, missing or wrong color
• Any lens is cracked, broken or discolored
• Step covering is loose, buckled, or made of a material other than rubber (i.e. rugs, carpets, mats, etc.)

• Any rear tire has less than 2/32 inch tread depth when measured in any two adjacent major grooves

• One (1) leaf spring is broken under the first two (2) leaves
• Any front turn signal does not function properly