MITCHELL COMMUNITY SCHOOLS

To view the full report for a bus inspection, click on the PDF icon on the right.

• The fire extinguisher is missing

• Required back-up lights do not function.

• The stop arm has faded or lost reflectivity
• Any component has deteriorated and allows the escape of exhaust gases (with the engine idling and the system unrestricted)
• Any hanger, clamp or bracket is missing, loose or broken
• Any exhaust leak can be felt with the bare hand six (6) inches from the leak in any direction (with the engine idling and the system unrestricted).

• Any component has deteriorated and allows the escape of exhaust gases (with the engine idling and the system unrestricted)
• Is no audible signal when the emergency door is open and ignition switch is on
• Stop arm does not fully extend to a right angle to the bus

• Any component has deteriorated and allows the escape of exhaust gases (with the engine idling and the system unrestricted)

• Any component has deteriorated and allows the escape of exhaust gases (with the engine idling and the system unrestricted)

• Any front tire has less than 4/32 inch tread depth when measured in any two adjacent major grooves

• Any front tire has less than 4/32 inch tread depth when measured in any two adjacent major grooves

• Any front tire has less than 4/32 inch tread depth when measured in a major groove.

• Any body clamp is loose.

• Excessive effort is needed to open the emergency door.
• Required padding is missing

• Any exhaust leak can be felt with the bare hand six (6) inches from the leak in any direction (with the engine idling and the system unrestricted).