DECATUR COUNTY COMM. SCHOOL

To view the full report for a bus inspection, click on the PDF icon on the right.

• There are weak areas due to deterioration

• Any required instrument or gauge is inoperative. (Speedometer, Odometer, Fuel Gauge, High beam, Brake indicator light or gauge, air pressure gauge, brake warning light, DEF Gauge)

• Any seat is broken or not attached to the floor
• A bumper does not meet manufactures specifications
• Any lens is cracked, missing, faded or of the wrong color
• One (1) taillight or one (1) brake light does not function
• There is no brake certification, or the certification has expired or is not signed
• The bus body has loose, damaged or improperly aligned body parts. These would include rivets, bolts, and body panels and/or rub rails

• If the emergency window instructions are illegible or missing. Must be within 6 inches of the release handle

• The horn does not operate at all

• The horn does not operate at all

• Clearance light is missing, cracked, faded, wrong color, or inoperative.
• The electric power assist motor fails to operate.

• The drive shaft has excessive up and down, or side to side movement at any universal joint or carrier bearing.

• Step-well light is missing or inoperative

• There is no brake certification, the certification has expired or is not signed.

• There is no brake certification, the certification has expired or is not signed.

• Any hanger, clamp or bracket is missing, loose or broken.
• There is no brake certification, the certification has expired or is not signed.
• The container must be no greater than a fourteen (14) quart capacity

• Any exhaust leak can be felt with the bare hand six (6) inches from the leak in any direction (with the engine idling and the system unrestricted).