DECATUR COUNTY COMM. SCHOOL

To view the full report for a bus inspection, click on the PDF icon on the right.

• Not fully charged

• There is no brake certification, or the certification has expired or is not signed

• The bus body has loose, damaged or improperly aligned body parts. These would include rivets, bolts, and body panels and/or rub rails
• See Notes: Any defect inspector deems a violation not listed
• There is debris in the bus. (needs cleaned/includes dirt)

• There is debris in the bus. (needs cleaned/includes dirt)
• Any interior protrusions have sharp edges or corners
• There are loose items that would create a hazard. (Broom, Scraper, Items on dash etc.)
• Interior is excessively dirty. (Excessive trash or dirt that would jeopardize the safety of students)
• Trim color is other than black
• Any paint is badly faded or peeling

• Trim color is other than black
• Any paint is badly faded or peeling
• Required back-up lights do not function.
• There are loose items that would create a hazard. (Broom, Scraper, Items on dash etc.)
• Any interior protrusions have sharp edges or corners
• Interior is excessively dirty. (Excessive trash or dirt that would jeopardize the safety of students)
• There is debris in the bus. (needs cleaned/includes dirt)
• There is any defect which the inspector feels would adversely affect the ability of the vehicle to stop safely
• There is no brake certification form the certification is expired or is not signed within the six-month requirement

• There is an air leak from any hose, line, tank, bag, or other component of an air suspension system
• Wiper blades fail to contact the windshield properly

• A dripping oil or fluid leak.
• Upholstery or padding is ripped, torn, or improperly repaired.
• Required lettering is missing or faded.

• There is body damage which could cause injury to persons near the bus (i.e. jagged metal edges, etc.).

• Crossmember is rusted sufficiently to weaken floor supports.
• Crossmember is cracked or broken
• Trim color is other than black.
• The bus body has loose, damaged or improperly aligned body parts. These would include rivets, bolts, and body panels and/or rub rails.
• The bus body has rust or rusted through areas which may weaken the body.

• If required, positive door opening device is missing or fails to operate properly.