LINCOLN HILLS DEV. CENTER

To view the full report for a bus inspection, click on the PDF icon on the right.

• Any reflector is missing, cracked, faded, or the wrong color.
• Any front turn signal does not function properly

• Tie rod end movement is greater than 1/8 inch (rotational movement is acceptable)
• Any lens is cracked, missing, faded or of the wrong color
• Any lens is cracked, broken or discolored

• Step-well light is missing or inoperative

• The front of the optional rear stop arm device has any lettering, symbols or markings

• Required back-up lights do not function.

• If the emergency window instructions are illegible or missing. Must be within 6 inches of the release handle

• The mirrors do not meet the outside mirror standard as set forth in 575 IAC 1-2-49
• The grill has any exposed edges that may cause injury
• The bus body has loose, damaged or improperly aligned body parts. These would include rivets, bolts, and body panels and/or rub rails
• The front or rear bumper is not properly attached, missing, torn, loose, or altered.

• The bus body has loose, damaged or improperly aligned body parts. These would include rivets, bolts, and body panels and/or rub rails
• The front or rear bumper is not properly attached, missing, torn, loose, or altered.
• The grill has any exposed edges that may cause injury
• The mirrors do not meet the outside mirror standard as set forth in 575 IAC 1-2-49

• If the emergency window instructions are illegible or missing. Must be within 6 inches of the release handle