BLOOMFIELD SCHOOL DISTRICT

To view the full report for a bus inspection, click on the PDF icon on the right.

• Warning lights fail to operate correctly

• Any clearance light is missing, cracked, faded, wrong color, or inoperative

• Any front turn signal does not function properly

• Required back-up lights do not function.

• There is no brake certification, or the certification has expired or is not signed

• Any clearance light is missing, cracked, faded, wrong color, or inoperative

• A dripping oil or fluid leak
• There is any movement indicating wear or deterioration in a control arm bushing

• If required, positive door opening device is missing or fails to operate properly.
• Heater motor is not operating properly.

• If required, positive door opening device is missing or fails to operate properly.

• Rear tire has less than 2/32 inch tread depth when measured in a major groove.
• Mirror or mirror backs are loose or improperly mounted.

• The "anti-vandalism" device fails to operate
• If required, positive door opening device is missing or fails to operate properly.

• Both lamps are inoperative on high beam.
• The bus body has rust or rusted through areas which may weaken the body.

• Exhaust leak occurs in the exhaust system prior to the muffler outlet.
• Any exhaust leak can be felt with the bare hand six (6) inches from the leak in any direction (with the engine idling and the system unrestricted).
• The engine has excessive oil or grime build-up, or if there is dirt or fluid standing on the engine (i.e. oil, coolant, etc.).
• There is significant engine oil or fluid leak from the engine.
• Any body clamp is loose.
• Any rear tire has less than 2/32 inch tread depth
• Mirror or mirror backs that are loose or improperly mounted.