HANOVER COMM. SCHOOL CORP.
To view the full report for a bus inspection, click on the PDF icon on the right.

Go Back New Search

Bus Inspections

Bus # Inspection Date/Time Inspection Valid Until Inspection Type Inspection Status Violations Inspected By Reports
18 4/10/2024 9:11:01 AM 9/30/2025 12:00:00 AM Annual Approved None Tim Grayson Export Inspection Report
18 3/28/2023 9:18:01 AM 9/30/2024 12:00:00 AM Annual Approved None Tim Grayson Export Inspection Report
18 4/4/2022 10:05:01 AM 9/30/2023 12:00:00 AM Annual Approved None Tim Grayson Export Inspection Report
18 4/23/2021 9:56:01 AM 9/30/2022 12:00:00 AM Annual Approved None Tim Grayson Export Inspection Report
18 4/6/2020 10:31:01 AM 9/30/2021 12:00:00 AM Annual Approved None Nathan Sherer Export Inspection Report
18 4/3/2018 8:38:01 AM 11/3/2018 8:38:01 AM Annual Approved None Tim Grayson Export Inspection Report
18 4/7/2017 9:33:01 AM 9/30/2018 12:00:00 AM Annual Approved None Nathan Sherer Export Inspection Report
18 4/7/2016 8:02:01 AM 9/30/2017 12:00:00 AM Annual Approved None Dale Morgan Export Inspection Report
18 4/17/2015 8:49:01 AM 9/30/2016 12:00:00 AM Annual Approved None Dale Morgan Export Inspection Report
18 4/8/2014 12:22:01 PM 9/30/2015 12:00:00 AM Re-Inspection Approved None David Eggers Export Inspection Report
18 4/8/2014 9:15:00 AM 5/7/2014 9:15:00 AM Annual Ordered Repaired
  • Any hanger, clamp or bracket is missing, loose or broken.
  • Upholstery or padding is ripped, torn, or improperly repaired.
  • Required instrument or gauge is missing.
David Eggers Export Inspection Report
18 3/22/2013 10:11:01 AM 9/30/2014 12:00:00 AM Re-Inspection Approved None Nathan Sherer Export Inspection Report
18 3/19/2013 1:41:00 PM 4/17/2013 1:41:00 PM Re-Inspection Ordered Repaired
  • Any hanger, clamp or bracket is missing, loose or broken.
Nathan Sherer Export Inspection Report
18 3/19/2013 1:28:01 PM 9/30/2014 12:00:00 AM Re-Inspection Approved None Nathan Sherer Export Inspection Report
18 3/19/2013 11:33:00 AM Annual Out of Service
  • An exhaust leak can be felt with the bare hand six (6) inches from the leak in any direction (with the engine idling and the system unrestricted).
  • Any component has deteriorated and allows the escape of exhaust gases (with the engine idling and the system unrestricted).
  • Exhaust leak occurs in the exhaust system exceeding 1" measurable in any direction or 1/2" in diameter.
Nathan Sherer Export Inspection Report
18 4/25/2012 2:23:00 PM 9/30/2013 12:00:00 AM Re-Inspection Approved None David Eggers Export Inspection Report
18 4/13/2012 10:56:00 AM 5/12/2012 10:56:00 AM Re-Inspection Ordered Repaired
  • There is no brake certification form the certification is expired or is not signed within the six-month requirement.
  • Any brake line or hose is abraded (chafed), cracked, bulging or leaking.
  • There is a fuel leak from any line, connection or fitting.
  • Exhaust leak occurs in the exhaust system prior to the muffler outlet.
  • Not fully charged
  • Audible warning device, when required, is not working properly. Buzzers are required after 5-2-94
Nathan Sherer Export Inspection Report
18 4/13/2012 9:23:00 AM Annual Out of Service
  • There is no brake certification form the certification is expired or is not signed within the six-month requirement.
  • Any brake line or hose is abraded (chafed), cracked, bulging or leaking.
  • There is a fuel leak from any line, connection or fitting.
  • Exhaust leak occurs in the exhaust system prior to the muffler outlet.
  • Not fully charged
  • Audible warning device, when required, is not working properly. Buzzers are required after 5-2-94
  • Any dome light is inoperative.
Nathan Sherer Export Inspection Report
Go Back New Search