UNION TOWNSHIP SCHOOL CORP

To view the full report for a bus inspection, click on the PDF icon on the right.

• If the emergency window instructions are illegible or missing. Must be within 6 inches of the release handle

• Air leak at proper connection
• Is no audible signal when the emergency door is open and ignition switch is on

• If the words “EMERGENCY EXIT” does not appear on the top or bottom of the window or directly above each emergency exit window on the inside of the bus

• There is no brake certification form the certification is expired or is not signed within the six-month requirement

• A heater motor is not operating properly

• The first aid kit is not complete: 3 packs of 16 1x3 adhesive strips, 1 scissor (4" min), 2 40"x40"x56" triangular bandages, 6 3"x3" gauze pads, 4 2"x4.1 yard rolls of gauze, 3 oval eye pads, 1 1"x5 yard of adhesive tape, 1 label instruction.

• Any hanger, clamp or bracket is missing, loose or broken.
• Step covering is loose, buckled, or made of a material other than rubber (i.e. rugs, carpets, mats, etc.)

• The bus body has rust or rusted through areas which may weaken the body.

• Any exhaust leak can be felt with the bare hand six (6) inches from the leak in any direction (with the engine idling and the system unrestricted).

• Any push-rod travel measures 1/4 inch or more beyond the readjustment limit, or if any two (2) brakes measure less than 1/4 inch beyond the readjustment limit.

• The bus body has rust or rusted through areas which may weaken the body.
• Any push-rod travel measures 1/4 inch or more beyond the readjustment limit, or if any two (2) brakes measure less than 1/4 inch beyond the readjustment limit.