STANLEY CLARK SCHOOL

To view the full report for a bus inspection, click on the PDF icon on the right.

• There is no seat belt cutter in the vehicle

• LED type lights have 50% or more pixels inoperable in one light. (NOTE: one letter in the word “STOP” equals one light.)

• The bus body has loose, damaged or improperly aligned body parts. These would include rivets, bolts, and body panels and/or rub rails
• The bus body has rust or rusted through areas which may weaken the body
• Any paint is badly faded or peeling
• The trash container is greater than a fourteen (14) quart capacity

• There is no brake certification, or the certification has expired or is not signed
• The trash container is greater than a fourteen (14) quart capacity
• The bus body has rust or rusted through areas which may weaken the body
• Any paint is badly faded or peeling
• The bus body has loose, damaged or improperly aligned body parts. These would include rivets, bolts, and body panels and/or rub rails
• There is body damage which could cause injury to persons near the bus (e.g. jagged metal edges, etc.)((Exigent circumstance can be taken into consideration to allow the bus to return home in a post crash inspection if bus is out of its district)).

• Any interior protrusions have sharp edges or corners
• Battery will not activate the starting motor

• Any wiring grommets are missing
• If the emergency window instructions are illegible or missing. Must be within 6 inches of the release handle
• Any interior protrusions have sharp edges or corners

• There is no brake certification, or the certification has expired or is not signed
• Any exhaust leak can be felt with the bare hand six (6) inches from the leak in any direction (with the engine idling and the system unrestricted).

• The first aid kit is not complete: 3 packs of 16 1x3 adhesive strips, 1 scissor (4" min), 2 40"x40"x56" triangular bandages, 6 3"x3" gauze pads, 4 2"x4.1 yard rolls of gauze, 3 oval eye pads, 1 1"x5 yard of adhesive tape, 1 label instruction.
• There is no brake certification, or the certification has expired or is not signed

• The first aid kit is not complete: 3 packs of 16 1x3 adhesive strips, 1 scissor (4" min), 2 40"x40"x56" triangular bandages, 6 3"x3" gauze pads, 4 2"x4.1 yard rolls of gauze, 3 oval eye pads, 1 1"x5 yard of adhesive tape, 1 label instruction.

• If bus manufactured after 5-2-1994, positive door opening device is missing or fails to operate properly
• Audible warning device, when required, is not working properly. Buzzers are required after 5-2-94

• If bus manufactured after 5-2-1994, positive door opening device is missing or fails to operate properly
• Audible warning device, when required, is not working properly. Buzzers are required after 5-2-94