CENTERVILLE-ABINGTON COMM SCHS

To view the full report for a bus inspection, click on the PDF icon on the right.

• Tires are cut, weathered, cracked, have lumps, or breaks that expose the cord
• ABS warning light is illuminated
• Any brake line or hose is abraded (chafed), cracked, bulging or leaking (leaking at other than a proper connection).
• There is any defect which the inspector feels would adversely affect the ability of the vehicle to stop safely
• Any seat is broken or not attached to the floor
• Any front turn signal does not function properly
• Stop arm does not function properly
• A heater motor is not operating properly
• The service door does not open or close properly
• Both lamps are inoperative on low beam
• Two (2) or more taillights or brake lights do not function
• Warning lights fail to operate correctly
• There is loose or unprotected wiring in passenger area
• Interior is excessively dirty. (Excessive trash or dirt that would jeopardize the safety of students)
• There are intersecting cracks in the windshield area covered by the wipers
• If any window does not meet the optional criteria
• Any required instrument or gauge is inoperative. (Speedometer, Odometer, Fuel Gauge, High beam, Brake indicator light or gauge, air pressure gauge, brake warning light, DEF Gauge)
• The flooring is improper
• There is an air leak from any hose, line, tank, bag, or other component of an air suspension system
• Any clearance light is missing, cracked, faded, wrong color, or inoperative
• Door glass is chipped, or cracked
• Required padding is missing
• Insulation is missing from any wire
• Any dome light lens is missing