M.S.D. WARREN TWP.
To view the full report for a bus inspection, click on the PDF icon on the right.

Go Back New Search

Bus Inspections

Bus # Inspection Date/Time Inspection Valid Until Inspection Type Inspection Status Violations Inspected By Reports
52 4/7/2025 10:48:01 AM 9/30/2026 12:00:00 AM Annual Approved None Jeff Stone Export Inspection Report
52 9/19/2024 10:29:01 AM 9/30/2025 12:00:00 AM Registration Approved None Nathan Hampton Export Inspection Report
52 8/30/2023 9:44:01 AM 3/30/2024 9:44:01 AM Semi-Annual Approved None Joel Flores Export Inspection Report
52 2/20/2023 8:34:01 AM 9/20/2023 8:34:01 AM Annual Approved None Jeff Stone Export Inspection Report
52 8/25/2022 11:39:01 AM 3/25/2023 11:39:01 AM Re-Inspection Approved None Jeff Stone Export Inspection Report
52 8/25/2022 10:26:00 AM Semi-Annual Out of Service
  • There is fuel leaking from any point on in the fuel system
Jeff Stone Export Inspection Report
52 2/25/2022 10:19:01 AM 9/25/2022 10:19:01 AM Annual Approved None Joel Flores Export Inspection Report
52 8/16/2021 10:36:01 AM 3/16/2022 10:36:01 AM Semi-Annual Approved None Joel Flores Export Inspection Report
52 3/5/2021 11:50:01 AM 10/5/2021 11:50:01 AM Annual Approved None Joel Flores Export Inspection Report
52 3/5/2020 9:20:01 AM 10/5/2020 9:20:01 AM Re-Inspection Approved None Jeff Stone Export Inspection Report
52 3/4/2020 10:32:00 AM Re-Inspection Out of Service
  • There are any holes in the floor
Jeff Stone Export Inspection Report
52 7/12/2019 9:33:01 AM 2/12/2020 9:33:01 AM Semi-Annual Approved None Matt Lawrence Export Inspection Report
52 2/22/2019 9:04:01 AM 9/22/2019 9:04:01 AM Re-Inspection Approved None Jeff Kastenschmidt Export Inspection Report
52 2/22/2019 9:03:00 AM Annual Out of Service
  • Any push-rod travel measures 1/4 inch or more beyond the readjustment limit, or if any two (2) brakes measure less than 1/4 inch beyond the readjustment limit
Jeff Kastenschmidt Export Inspection Report
52 7/30/2018 9:55:01 AM 2/28/2019 9:55:01 AM Semi-Annual Approved None Jeff Kastenschmidt Export Inspection Report
52 3/1/2018 9:53:01 AM 10/1/2018 9:53:01 AM Annual Approved None Jeff Kastenschmidt Export Inspection Report
52 2/27/2017 9:41:01 AM 9/30/2018 12:00:00 AM Annual Approved None John Pang Export Inspection Report
52 2/23/2016 10:26:01 AM 9/30/2017 12:00:00 AM Annual Approved None John Pang Export Inspection Report
52 3/9/2015 10:17:01 AM 9/30/2016 12:00:00 AM Annual Approved None John Pang Export Inspection Report
52 3/10/2014 11:09:01 AM 9/30/2015 12:00:00 AM Annual Approved None Mike Adams Export Inspection Report
52 7/11/2013 10:50:01 AM 9/30/2014 12:00:00 AM Annual Approved None Edwin Davis Export Inspection Report
52 7/11/2013 10:35:01 AM 9/30/2014 12:00:00 AM Post-Crash Inspection Approved None Edwin Davis Export Inspection Report
52 3/15/2013 12:41:00 PM Post-Crash Inspection Out of Service None John Pang Export Inspection Report
52 3/15/2013 11:50:00 AM Post-Crash Inspection Out of Service
  • Emergency window instructions are illegible, missing, or not within 6 inches of the release handle
  • One (1) taillight or one (1) brake light does not function
  • The first aid kit is not properly filled.
  • A dripping oil or fluid leak.
  • Body surface protrudes beyond the normal limits of the body structure.
  • There is body damage which could cause injury to persons near the bus (i.e. jagged metal edges, etc.).
  • The bus body has loose, damaged or improperly aligned body parts. These would include rivets, bolts, and body panels and/or rub rails.
  • The front or rear bumper is missing, torn, loose or altered from original specifications.
  • Defroster system is inoperative.
  • Heater motor is not operating properly.
John Pang Export Inspection Report
52 2/29/2012 11:58:00 AM 9/30/2013 12:00:00 AM Re-Inspection Approved None Chris Kath Export Inspection Report
52 2/29/2012 10:30:00 AM Annual Out of Service
  • Tie rod end movement is greater than 1/8 inch (rotational movement is acceptable)
  • There are any loose, broken, or missing mountings
  • If the emergency window instructions are illegible or missing. Must be within 6 inches of the release handle
Chris Kath Export Inspection Report
Go Back New Search