SCHOOL CITY OF MISHAWAKA

To view the full report for a bus inspection, click on the PDF icon on the right.

• Both lamps are inoperative on low beam
• Any clearance light is missing, cracked, faded, wrong color, or inoperative

• If bus manufactured after 5-2-1994, positive door opening device is missing or fails to operate properly

• Any dome light is inoperative

• Turn signals are not properly mounted
• Any tire is flat
• There is no brake certification, or the certification has expired or is not signed
• Mountings are broken or bent badly enough to inhibit proper adjustment
• There is body damage which could cause injury to persons near the bus (e.g. jagged metal edges, etc.)((Exigent circumstance can be taken into consideration to allow the bus to return home in a post crash inspection if bus is out of its district)).
• The bus body has loose, damaged or improperly aligned body parts. These would include rivets, bolts, and body panels and/or rub rails

• Any dome light is inoperative
• Stanchions, guardrails, guard panels or barriers are insecurely attached
• Exhaust leak exceeding one (1) inch measurable in any direction or half (½) inch in diameter.
• Tailpipe does not extend to, or extends more than 1" beyond the perimeter of the bus body

• Step-well light is missing or inoperative
• Any dome light is inoperative
• There is no seat belt cutter in the vehicle
• Any door seals are missing, damaged, or torn
• There is body damage which could cause injury to persons near the bus (e.g. jagged metal edges, etc.)((Exigent circumstance can be taken into consideration to allow the bus to return home in a post crash inspection if bus is out of its district)).