SETON CATHOLIC SCHOOL

To view the full report for a bus inspection, click on the PDF icon on the right.

• Any part of the step-well or support structure is rusted through
• There are any holes in the floor
• There are weak areas due to deterioration
• There are any leaks from the differential, pinion seal, hubs or wheel seals

• Any clearance light is missing, cracked, faded, wrong color, or inoperative
• The seat belt cutter is not secured using a positive fastening method.
• There is no brake certification form the certification is expired or is not signed within the six-month requirement

• There is no brake certification form the certification is expired or is not signed within the six-month requirement
• Any clearance light is missing, cracked, faded, wrong color, or inoperative

• If equipped the emergency warning buzzer does not sound
• Upholstery or padding is ripped, torn, or improperly repaired

• Lettering is missing or improper (Two (2) inch high letters EMERGENCY DOOR directly above the inside and outside of door, and operating instructions on how to open door.)
• Any hanger, clamp or bracket is missing, loose or broken

• If bus manufactured after 5-2-1994, positive door opening device is missing or fails to operate properly
• The first aid kit is not complete: 3 packs of 16 1x3 adhesive strips, 1 scissor (4" min), 2 40"x40"x56" triangular bandages, 6 3"x3" gauze pads, 4 2"x4.1 yard rolls of gauze, 3 oval eye pads, 1 1"x5 yard of adhesive tape, 1 label instruction.

• If bus manufactured after 5-2-1994, positive door opening device is missing or fails to operate properly
• Step-well light is missing or inoperative
• Step-well area is weakened
• The first aid kit is not complete: 3 packs of 16 1x3 adhesive strips, 1 scissor (4" min), 2 40"x40"x56" triangular bandages, 6 3"x3" gauze pads, 4 2"x4.1 yard rolls of gauze, 3 oval eye pads, 1 1"x5 yard of adhesive tape, 1 label instruction.
• The first aid or bodily fluid (optional) kit is not in a dustproof, detachable container, has sharp protrusions, or requires tools to open.
• Any component has deteriorated and allows the escape of exhaust gases (with the engine idling and the system unrestricted)
• Battery compartment floor is weakened from rust

• A dripping oil or fluid leak
• If equipped the emergency warning buzzer does not sound
• Battery compartment floor is weakened from rust
• Any required padding is missing
• Upholstery or padding is ripped, torn, or improperly repaired

• Any brake line or hose is abraded (chafed), cracked, bulging or leaking (leaking at other than a proper connection).
• If equipped the emergency warning buzzer does not sound
• There is a significant leak from the engine or transmission onto the exhaust system which could potentially cause a fire
• Washers do not function properly in any manner
• Any required padding is missing
• Upholstery or padding is ripped, torn, or improperly repaired

• Upholstery or padding is ripped, torn, or improperly repaired

• A dripping oil or fluid leak
• There are any leaks from the differential, pinion seal, or either rear wheel seal

• A dripping oil or fluid leak
• There are any leaks from the differential, pinion seal, or either rear wheel seal

• There is no brake certification form the certification is expired or is not signed within the six-month requirement
• There are any leaks from the differential, pinion seal, or either rear wheel seal
• A dripping oil or fluid leak

• There is no brake certification form the certification is expired or is not signed within the six-month requirement
• A dripping oil or fluid leak
• There are any leaks from the differential, pinion seal, or either rear wheel seal

• Any component has deteriorated and allows the escape of exhaust gases (with the engine idling and the system unrestricted).
• An exhaust leak can be felt with the bare hand six (6) inches from the leak in any direction (with the engine idling and the system unrestricted).
• Exhaust leak occurs in the exhaust system exceeding 1" measurable in any direction or 1/2" in diameter.
• Front turn signal does not function properly

• There is any defect which the inspector feels would adversely affect the ability of the vehicle to stop safely.
• There is no brake certification, the certification is expired, or is not signed within the six-month requirement.

• There is any defect which the inspector feels would adversely affect the ability of the vehicle to stop safely.
• There is no brake certification, the certification is expired, or is not signed within the six-month requirement.
• Clearance light is missing, cracked, faded, wrong color, or inoperative.
• Step-well light is missing or inoperative
• One (1) taillight or one (1) brake light does not function
• The reflective material is improperly installed.
• Required lettering is missing or faded.
• Emergency window instructions are illegible, missing, or not within 6 inches of the release handle
• Required reflective tape is applied in the wrong location, missing, and wrong width or badly faded
• Lettering is missing or improper.
• If required, reflective tape is applied in the wrong location, missing, and wrong width or badly faded.
• Outside exit not outlined with yellow or white 1" in width reflective tape(after chassis manufactured date of 05-02-94)

• Any brake line or hose is abraded (chafed), cracked, bulging or leaking.