NORTHERN WELLS COMM. SCHOOLS

To view the full report for a bus inspection, click on the PDF icon on the right.

• The seat belt cutter is contained in a compartment.
• The seat belt cutter is not secured using a positive fastening method.
• Any hanger, clamp or bracket is missing, loose or broken

• The seat belt cutter is contained in a compartment.
• The seat belt cutter is not secured using a positive fastening method.
• There are loose items that would create a hazard. (Broom, Scraper, Items on dash etc.)
• Any hanger, clamp or bracket is missing, loose or broken
• Any push-rod travel measures 1/4 inch or more beyond the readjustment limit, or if any two (2) brakes measure less than 1/4 inch beyond the readjustment limit

• LED type lights have 25% to 49% pixels inoperable in any one light. (NOTE: one letter in the word “STOP” equals one light

• There is air leak at the stop arm air bladder that does not affect the air braking system

• LED type lights have 50% or more pixels inoperable in one light. (NOTE: one letter in the word “STOP” equals one light.)
• There is air leak at the stop arm air bladder that does not affect the air braking system

• Any rear turn signal does not function properly
• See Notes: Any defect inspector deems a violation not listed

• The trash container is not securely fastened
• The trash container is greater than a fourteen (14) quart capacity

• Any heater hose inside the bus is not covered with a protective covering.