M.S.D. WASHINGTON TOWNSHIP Bus Inspections

M.S.D. WASHINGTON TOWNSHIP
To view the full report for a bus inspection, click on the PDF icon on the right.

Bus Inspections

Bus #	Inspection Date/Time	Inspection Valid Until	Inspection Type	Inspection Status	Violations	Inspected By	Reports
33	2/7/2024 9:49:01 AM	9/30/2025 12:00:00 AM	Annual	Approved	None	Joel Flores
33	2/2/2023 9:45:01 AM	9/30/2024 12:00:00 AM	Annual	Approved	None	Joel Flores
33	1/28/2022 11:39:01 AM	9/30/2023 12:00:00 AM	Annual	Approved	None	Joel Flores
33	9/14/2021 9:59:01 AM	9/30/2022 12:00:00 AM	Registration	Approved	None	Joel Flores
33	2/4/2020 11:26:01 AM	9/4/2020 11:26:01 AM	Annual	Approved	None	Jeff Kastenschmidt
33	7/2/2019 7:50:01 AM	2/2/2020 7:50:01 AM	Semi-Annual	Approved	None	Jeff Kastenschmidt
33	1/28/2019 10:47:01 AM	8/28/2019 10:47:01 AM	Annual	Approved	None	Jeff Kastenschmidt
33	7/18/2018 7:55:01 AM	2/18/2019 7:55:01 AM	Semi-Annual	Approved	None	Jeff Kastenschmidt
33	2/2/2018 9:46:01 AM	9/2/2018 9:46:01 AM	Annual	Approved	None	John Pang
33	2/3/2017 3:10:01 PM	9/30/2018 12:00:00 AM	Re-Inspection	Approved	None	John Pang
33	2/2/2017 10:20:00 AM		Annual	Out of Service	There is fuel leaking from any point on in the fuel system	Edwin Davis
33	2/4/2016 9:37:10 AM	9/30/2017 12:00:00 AM	Annual	Approved	None	John Pang
33	2/11/2015 10:49:01 AM	9/30/2016 12:00:00 AM	Annual	Approved	None	John Pang
33	2/17/2014 9:27:01 AM	9/30/2015 12:00:00 AM	Annual	Approved	None	Mike Adams
33	2/12/2013 10:56:01 AM	9/30/2014 12:00:00 AM	Annual	Approved	None	Chris Kath
33	2/8/2012 10:23:00 AM	9/30/2013 12:00:00 AM	Re-Inspection	Approved	None	Chris Kath
33	2/8/2012 9:41:00 AM	3/8/2012 9:41:00 AM	Re-Inspection	Ordered Repaired	Any push-rod travel measures 1/4 inch or more beyond the readjustment limit, or if any two (2) brakes measure less than 1/4 inch beyond the readjustment limit.	Chris Kath
33	2/8/2012 9:40:00 AM		Annual	Out of Service	Any push-rod travel measures 1/4 inch or more beyond the readjustment limit, or if any two (2) brakes measure less than 1/4 inch beyond the readjustment limit. There is an air leak from any hose, line, tank, bag, or other component of an air suspension system The engine has excessive oil or grime build-up, or if there is dirt or fluid standing on the engine (i.e. oil, coolant, etc.).	Chris Kath