KOKOMO SCHOOL CORPORATION

To view the full report for a bus inspection, click on the PDF icon on the right.

• ABS warning light is illuminated
• A heater motor is not operating properly

• A dripping oil or fluid leak

• Any optional rear stop arm device or school bus crossing arm criteria is not met

• There are any leaks from the differential, pinion seal, hubs or wheel seals
• Not equipped with two lights mounted over the special service entrance door that are operable from the door area and illuminate the special service entrance door area

• Any emergency window is too difficult to open
• There are loose items that would create a hazard. (Broom, Scraper, Items on dash etc.)
• Washers do not function properly in any manner
• Warning lights fail to operate correctly
• Not equipped with two lights mounted over the special service entrance door that are operable from the door area and illuminate the special service entrance door area
• There are any leaks from the differential, pinion seal, hubs or wheel seals
• Any seat back or bottom is loose

• See Notes: Any defect inspector deems a violation not listed
• Any seat back or bottom is loose

• Any seat back or bottom is loose

• There is any defect which the inspector feels would adversely affect the ability of the vehicle to stop safely

• Any seat back or bottom is loose
• ABS warning light is illuminated

• Any brake line or hose is abraded (chafed), cracked, bulging or leaking (leaking at other than a proper connection).
• A heater motor is not operating properly

• ABS warning light is illuminated
• Any seat back or bottom is loose
• Not securely mounted

• Any headlight is inoperative

• Headlight is inoperative.

• Any seat back or bottom is loose.