MILLER TRANSPORTATION

To view the full report for a bus inspection, click on the PDF icon on the right.

• The bus body has loose, damaged or improperly aligned body parts. These would include rivets, bolts, and body panels and/or rub rails
• Any body surface protrudes beyond the normal limits of the body structure
• Any brake line or hose is abraded (chafed), cracked, bulging or leaking (leaking at other than a proper connection).
• There is any cracked glass to the immediate right or left of the driver
• Any tire is flat
• See Notes: Any defect inspector deems a violation not listed
• Any steering component jams or inhibits safe movement
• The front or rear bumper is not properly attached, missing, torn, loose, or altered.
• A dripping oil or fluid leak
• Step-well area is weakened
• Floor sags or buckles substantially when stood upon. (NOTE: Check under bus to verify deterioration.)
• One (1) leaf spring is broken under the first two (2) leaves
• Frame is deteriorated, cracked, broken or severely bent
• The latch is not properly aligned, is loose or badly rusted

• Any push-rod travel measures less than 1/4 inch beyond the readjustment limit

• There is fuel leaking from any point on in the fuel system