MUNCIE COMMUNITY SCHOOLS

To view the full report for a bus inspection, click on the PDF icon on the right.

• Any required padding is missing
• Not securely mounted
• There is no brake certification, or the certification has expired or is not signed
• A heater motor is not operating properly
• Excessive effort is needed to open the emergency door

• Any door seals are missing, damaged, or torn

• There is debris in the bus. (needs cleaned/includes dirt)
• There is loose or unprotected wiring in passenger area
• There are loose items that would create a hazard. (Broom, Scraper, Items on dash etc.)
• See Notes: Any defect inspector deems a violation not listed
• The horn does not operate at all
• Any seat is loose from the floor or seat rail
• See Notes: Any defect inspector deems a violation not listed
• Any door seals are missing, damaged, or torn

• There are weak areas due to deterioration
• Any clearance light is missing, cracked, faded, wrong color, or inoperative
• The mirrors do not meet the outside mirror standard as set forth in 575 IAC 1-2-49
• There are loose items that would create a hazard. (Broom, Scraper, Items on dash etc.)
• If bus manufactured after 5-2-1994, positive door opening device is missing or fails to operate properly
• Any marker light or lens is missing, cracked, faded, wrong color, or inoperative
• A heater motor is not operating properly

• A heater motor is not operating properly
• The mirrors do not meet the outside mirror standard as set forth in 575 IAC 1-2-49
• There are loose items that would create a hazard. (Broom, Scraper, Items on dash etc.)
• Any clearance light is missing, cracked, faded, wrong color, or inoperative
• If bus manufactured after 5-2-1994, positive door opening device is missing or fails to operate properly

• A heater motor is not operating properly
• Any clearance light is missing, cracked, faded, wrong color, or inoperative
• The seat belt cutter does not have a full width handgrip, with a protective blade to minimize risk
• If bus manufactured after 5-2-1994, positive door opening device is missing or fails to operate properly
• There are loose items that would create a hazard. (Broom, Scraper, Items on dash etc.)
• The mirrors do not meet the outside mirror standard as set forth in 575 IAC 1-2-49

• Upholstery or padding is ripped, torn, or improperly repaired

• Upholstery or padding is ripped, torn, or improperly repaired
• Any hanger, clamp or bracket is missing, loose or broken
• Exhaust leak exceeding one (1) inch measurable in any direction or half (½) inch in diameter.
• The horn does not operate at all

• Any tire has low air pressure

• If bus manufactured after 5-2-1994, positive door opening device is missing or fails to operate properly

• If bus manufactured after 5-2-1994, positive door opening device is missing or fails to operate properly
• There is no brake certification, or the certification has expired or is not signed

• If bus manufactured after 5-2-1994, positive door opening device is missing or fails to operate properly
• Any interior protrusions have sharp edges or corners
• Any paint is badly faded or peeling

• Audible warning device, when required, is not working properly. Buzzers are required after 5-2-94

• Not securely mounted
• A lens is cracked, missing or wrong color
• Audible warning device, when required, is not working properly. Buzzers are required after 5-2-94

• The horn does not operate at all

• The trash container is not secured to prevent movement and does not allow for easy removal and replacement

• Not fully charged
• The reflective material is improperly installed.