GREATER JASPER CONS. SCHOOLS

To view the full report for a bus inspection, click on the PDF icon on the right.

• Washers do not function properly in any manner

• The required low air-pressure warning device fails to operate properly
• There is body damage which could cause injury to persons near the bus (e.g. jagged metal edges, etc.)((Exigent circumstance can be taken into consideration to allow the bus to return home in a post crash inspection if bus is out of its district)).
• Required back-up lights do not function.

• The horn does not operate at all

• The horn does not operate at all
• The trash container is not secured to prevent movement and does not allow for easy removal and replacement
• The seat belt cutter is not secured using a positive fastening method.

• There are weak areas due to deterioration
• If the emergency window instructions are illegible or missing. Must be within 6 inches of the release handle

• There is no brake certification form the certification is expired or is not signed within the six-month requirement

• A heater motor is not operating properly
• Required back-up lights do not function.

• Required back-up lights do not function.
• A heater motor is not operating properly

• Required back-up lights do not function.
• A heater motor is not operating properly

• Any clearance light is missing, cracked, faded, wrong color, or inoperative
• Required back-up lights do not function.

• Any marker light or lens is missing, cracked, faded, wrong color, or inoperative
• Audible warning device, when required, is not working properly. Buzzers are required after 5-2-94

• If required, positive door opening device is missing or fails to operate properly.

• Any component has deteriorated and allows the escape of exhaust gases (with the engine idling and the system unrestricted).

• Any exhaust leak can be felt with the bare hand six (6) inches from the leak in any direction (with the engine idling and the system unrestricted).