MACONAQUAH SCHOOL CORPORATION

To view the full report for a bus inspection, click on the PDF icon on the right.

• There is no seat belt cutter in the vehicle

• Flip seat does not stay in the upright position when no passengers are seated

• The bus body has loose, damaged or improperly aligned body parts. These would include rivets, bolts, and body panels and/or rub rails
• There is body damage which could cause injury to persons near the bus (e.g. jagged metal edges, etc.)((Exigent circumstance can be taken into consideration to allow the bus to return home in a post crash inspection if bus is out of its district)).
• Flip seat does not stay in the upright position when no passengers are seated
• A dripping oil or fluid leak
• Rims are bent or loose
• Any tire is flat
• Battery compartment door is not securely fastened.
• There are loose items that would create a hazard. (Broom, Scraper, Items on dash etc.)

• Not fully charged

• Any brake line or hose is abraded (chafed), cracked, bulging or leaking (leaking at other than a proper connection).

• The trash container is not secured to prevent movement and does not allow for easy removal and replacement
• Required back-up lights do not function.

• Is no audible signal when the emergency door is open and ignition switch is on
• Required back-up lights do not function.
• Warning lights fail to operate correctly
• The trash container is not secured to prevent movement and does not allow for easy removal and replacement

• Any dome light is inoperative

• Wiper motors are not of sufficient power to operate the wiper blades

• Any brake line or hose is abraded (chafed), cracked, bulging or leaking.