| Bus # |
Inspection Date/Time |
Inspection Valid Until |
Inspection Type |
Inspection Status |
Violations |
Inspected By |
Reports |
| 1 |
9/24/2025 10:11:01 AM |
4/24/2026 10:11:01 AM |
Annual |
Approved |
None
|
Nathan Hampton |
|
| 1 |
10/28/2024 9:49:01 AM |
9/30/2025 12:00:00 AM |
Re-Inspection |
Approved |
None
|
Jeff Stone |
|
| 1 |
10/7/2024 9:21:00 AM |
11/5/2024 9:21:00 AM |
Annual |
Ordered Repaired |
- The mirrors do not meet the outside mirror standard as set forth in 575 IAC 1-2-49
- Any hanger, clamp or bracket is missing, loose or broken
- There are loose, broken or frayed wires
|
Joel Flores |
|
| 1 |
8/2/2023 9:15:01 AM |
9/30/2024 12:00:00 AM |
Re-Inspection |
Approved |
None
|
Joel Flores |
|
| 1 |
7/26/2023 10:24:00 AM |
|
Annual |
Out of Service |
- There is no brake certification, or the certification has expired or is not signed
|
Jeff Stone |
|
| 1 |
10/6/2022 10:47:01 AM |
9/30/2023 12:00:00 AM |
Re-Inspection |
Approved |
None
|
Jeff Stone |
|
| 1 |
10/6/2022 10:15:00 AM |
|
Re-Inspection |
Out of Service |
- There is no seat belt cutter in the vehicle
|
Jeff Stone |
|
| 1 |
9/14/2022 9:35:00 AM |
|
Annual |
Out of Service |
- The bus with a body build date of January 1, 2006 or after is not equipped with the noise suppression switch. EXEMPTION Type A buses - w/out noise making devices other OEM accessories not including two-way, AM/FM, Satellite, or similar.
- Any dome light is inoperative
- There is no brake certification, or the certification has expired or is not signed
- LED type lights have 25% to 49% pixels inoperable in any one light
- There is no seat belt cutter in the vehicle
- There are loose items that would create a hazard. (Broom, Scraper, Items on dash etc.)
|
Jeff Stone |
|
| 1 |
3/11/2021 9:04:01 AM |
9/30/2022 12:00:00 AM |
Re-Inspection |
Approved |
None
|
Jeff Kastenschmidt |
|
| 1 |
12/10/2020 10:07:00 AM |
|
Registration |
Out of Service |
- Any required lettering is missing or faded.
- If bus manufactured after 5-2-1994, positive door opening device is missing or fails to operate properly
- There is no brake certification, or the certification has expired or is not signed
|
Jeff Kastenschmidt |
|
| 1 |
1/31/2020 11:06:00 AM |
|
Re-Inspection |
Out of Service |
- Any crossmember is cracked or broken
|
Matt Lawrence |
|
| 1 |
9/26/2019 10:59:00 AM |
|
Re-Inspection |
Out of Service |
- Any crossmember is cracked or broken
|
Jeff Kastenschmidt |
|
| 1 |
7/9/2019 9:51:00 AM |
|
Semi-Annual |
Out of Service |
- Frame is deteriorated, cracked, broken or severely bent
- A dripping oil or fluid leak
- There is no brake certification, or the certification has expired or is not signed
- The seat belt cutter does not have a full width handgrip, with a protective blade to minimize risk
|
Matt Lawrence |
|
| 1 |
1/17/2019 9:16:01 AM |
8/17/2019 9:16:01 AM |
Annual |
Approved |
None
|
Alex Willis |
|
| 1 |
7/24/2018 12:09:01 PM |
2/24/2019 12:09:01 PM |
Re-Inspection |
Approved |
None
|
Alex Willis |
|
| 1 |
7/19/2018 11:08:00 AM |
|
Re-Inspection |
Out of Service |
- There is no brake certification, or the certification has expired or is not signed
|
Alex Willis |
|
| 1 |
6/27/2018 9:09:00 AM |
|
Annual |
Out of Service |
- Any tire has low air pressure
- There is any defect, which the inspector feels would adversely affect the ability of the vehicle to stop safely
- There is no brake certification, or the certification has expired or is not signed
- Is no audible signal when the emergency door is open and ignition switch is on
- Any headlight is inoperative
- See Notes: Any defect inspector deems a violation not listed
- There are any cracks in any steering component
- Mirror or mirror backs that are loose or improperly mounted
- There is a significant leak from the engine or transmission onto the exhaust system which could potentially cause a fire
|
John Pang |
|
| 1 |
9/19/2017 9:07:01 AM |
4/19/2018 9:07:01 AM |
Re-Inspection |
Approved |
None
|
John Pang |
|
| 1 |
7/28/2017 9:46:00 AM |
|
Annual |
Out of Service |
- See Notes: Any defect inspector deems a violation not listed
- Tie rod end movement is greater than 1/8 inch (rotational movement is acceptable)
- There is pitman arm movement on output shaft
- Any lens is cracked, missing, faded or of the wrong color
- The interior storage container (MFSAB/Special Purpose Bus ONLY) is not securely fastened to the floor or does not have a cover with a positive fastening device.
- See Notes: Any defect inspector deems a violation not listed
- Any dome light is inoperative
- There is no brake certification, or the certification has expired or is not signed
- A trailer hitch is attached to the frame
- See Notes: Any defect inspector deems a violation not listed
- The horn does not operate at all
- Not of proper size according to manufacture specification
|
Jeff Kastenschmidt |
|
| 1 |
9/6/2016 10:12:01 AM |
4/6/2017 10:12:01 AM |
Registration |
Approved |
None
|
Larry Gershanoff |
|
| 1 |
8/24/2016 12:40:00 PM |
9/22/2016 12:40:00 PM |
Registration |
Ordered Repaired |
- Any marker light or lens is missing, cracked, faded, wrong color, or inoperative
- Required back-up lights do not function.
|
Larry Gershanoff |
|
