MARQUETTE HIGH SCHOOL

To view the full report for a bus inspection, click on the PDF icon on the right.

• If bus manufactured after 5-2-1994, positive door opening device is missing or fails to operate properly

• Any required lettering is missing or faded.
• Required back-up lights do not function.

• There is no brake certification, or the certification has expired or is not signed
• Required back-up lights do not function.
• Any required lettering is missing or faded.

• There is loose or unprotected wiring in passenger area
• Any required lettering is missing or faded.
• Any hanger, clamp or bracket is missing, loose or broken
• Any back-up light lens is cracked, broken, faded or missing
• Required back-up lights do not function.

• There is no seat belt cutter in the vehicle
• There is no brake certification, or the certification has expired or is not signed

• If bus manufactured after 5-2-1994, positive door opening device is missing or fails to operate properly

• If bus manufactured after 5-2-1994, positive door opening device is missing or fails to operate properly

• If bus manufactured after 5-2-1994, positive door opening device is missing or fails to operate properly

• If bus manufactured after 5-2-1994, positive door opening device is missing or fails to operate properly

• Any dome light is inoperative

• There is no seat belt cutter in the vehicle

• Any hanger, clamp or bracket is missing, loose or broken

• The first aid kit is not properly filled.
• Any hanger, clamp or bracket is missing, loose or broken.

• There is no seat belt cutter in the vehicle.
• The first aid kit is not properly filled.

• If equipped, the emergency warning buzzer does not sound.

• The first aid kit is not properly filled in accordance with the '24 Unit Kit'.
• Any required lettering is missing or faded.

• Any fluid leaks from the heater or hoses into the bus interior.
• Exhaust leak occurs in the exhaust system prior to the muffler outlet.
• There is significant engine oil or fluid leak from the engine.

• The first aid kit is not properly filled in accordance with the '24 Unit Kit'.
• Tires are worn so as to expose wear bar indicators, contacting the roadway surface in any two (2) major tread groups at three (3) locations spaced equally around the tire
• Any rear tire has less than 2/32 inch tread depth
• There is no brake certification, the certification has expired or is not signed.

• Exhaust leak occurs in the exhaust system prior to the muffler outlet.
• Any fluid leaks from the heater or hoses into the bus interior.
• Any paint is badly faded or peeling.
• The bus body has rust or rusted through areas which may weaken the body.

• There is significant engine oil or fluid leak from the engine.
• Exhaust leak occurs in the exhaust system prior to the muffler outlet.

• There is no brake certification, the certification has expired or is not signed.
• If required, positive door opening device is missing or fails to operate properly.
• Any rear tire has less than 2/32 inch tread depth
• The first aid kit is not properly filled in accordance with the '24 Unit Kit'.

• There is significant engine oil or fluid leak from the engine.
• Exhaust leak occurs in the exhaust system prior to the muffler outlet.